Free shipping on UK orders over £100
We sell to all EU countries
300V – 0 – 300V @ 200mA
6.3V @ 4A Centre tapped
6.3V @ 2A tapped at 5V @ 2A.
Incorporated copper screen for electrostatic noise reduction, and safety.
Designed and tested to European standards.
£146.01
Designed to power a Mullard 5-10 Stereo amplifier using a single GZ34 or two EZ81 rectifiers.
Proudly made in the United Kingdom
European primary voltages, 220V, 230V, 240V and 250V.
HT winding 300V – 0 – 300V at 200mA
Heater windings 6.3V at 4A centre tapped.
Rectifier winding 6.3V at 2A tapped at 5V at 2A.
High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.
Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Solid copper sheet providing the best RF screening possible between primary and secondaries.
High quality PVC 600V
Primary and HT : 22AWG UL1015
Secondary LT : 20 AWG UL1015
3Kg
Built and tested to safety standard BS EN 61558-1 2005
| Weight | 3 kg |
|---|---|
| Mounting type | Stand up |
Here are dimensional diagrams for this transformer.
Please refer to the relevant key below for the dimensions.
| Label | Description | Dimension (mm) |
|---|---|---|
| A | Width | 98 |
| B | Height | 117 |
| C | Depth | 98 |
| D | Mounting depth | 51 |
| E | Mounting width | 89 |
| F | Hole width | 5 |
Only logged in customers who have purchased this product may leave a review.
shroud_with_feet.pdf
terry kellett (verified owner) –
Built A Stereo Amplifier Using 6v6 Valves Fantastic Transformer Been On For Over 4 Hours Only Just Warm
Will Use Again