Free shipping on UK orders over £100
We sell to all EU countries

EL84 Push-Pull 10W Output transformer 6600 Ohms 20% UL taps (Mullard 5-10)

A high quality 10W at 20Hz Push pull ultra linear output transformer. Designed for the Mullard 5-10 amplifier but may be used in any single ended design with a valve having an output impedance of 6600 Ohms anode to anode, such as an EL84.

Primary

Multi section winding, for reduced leakage inductance.

Inductance

Inductance 35H at 25Hz.
Leakage inductance 6mH

Bandwidth

Wide bandwidth, 10-50KHz. (-1dB)

Secondary

Output impedance 4,8 and 16 Ohms.

Steel

High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.

Winding wire

Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Layer wound for excellent wind consistency and alignment resulting in reduced leakage inductance.

Connecting wire – stand up only

High quality PVC 600V
Primary : 24AWG UL1015
Secondary : 20 AWG UL1015

Mounting

Frame, Drop through or stand up versions, all with flying leads.

Weight

1.6Kg

A high quality 10W at 20Hz Push pull ultra linear output transformer. Designed for the Mullard 5-10 amplifier but may be used in any single ended design with a valve having an output impedance of 8000 Ohms anode to anode, such as an EL84.

This is similar to our 6600 Ohm 20% ultra linear tap design, but results in an improvement in distortion of around 0.1% as described in the Mullard “Circuits for amplifiers” book.

Primary

Multi section winding, for reduced leakage inductance.

Inductance

Inductance 35H at 25Hz.
Leakage inductance 3mH

Bandwidth

Wide bandwidth, 10-50KHz. (-1dB)

Secondary

Output impedance 4,8 and 16 Ohms.

Steel

High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.

Winding wire

Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Layer wound for excellent wind consistency and alignment resulting in reduced leakage inductance.

Connecting wire – stand up only

High quality PVC 600V
Primary : 24AWG UL1015
Secondary : 20 AWG UL1015

Mounting

Frame, Drop through or stand up versions, all with flying leads.

Weight

1.6Kg