A high quality 3.5W Single ended output transformer. Designed for the Mullard 3-3 amplifier but may be used in any single ended design with a valve having an output impedance of 5000 Ohms, such as an EL84.
Primary
50mA DC current
Multi section winding, for reduced leakage inductance.
Inductance
Inductance 24H at 25Hz.
Leakage inductance 15mH
Bandwidth
Wide bandwidth, 20-30KHz. (-1dB)
Secondary
Output impedance 4,8 and 16 Ohms.
Steel
High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.
Winding wire
Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Layer wound for excellent wind consistency and alignment resulting in reduced leakage inductance.
Connecting wire – stand up only
High quality PVC 600V
Primary : 24AWG UL1015
Secondary : 20 AWG UL1015
Mounting
Available in Clamp, Frame, Drop through or stand up versions.
A superb quality mains transformer for any valve project. Originally designed to power a Mullard 5-10 Mono amplifier. It will happily power a stereo Mullard 3-3 amplifier alone, without the pre-amp.
Proudly made in the United Kingdom
Primaries
European primary voltages, 220V, 230V, 240V and 250V.
US primary dual 120V.
Secondaries
HT winding 300V – 0 – 300V at 100mA DC
Heater winding 6.3V at 2A centre tapped.
Rectifier winding 6.3V at 1A
Steel
High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.
Winding wire
Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Electrostatic Screen
Solid copper sheet providing the best RF screening possible between primary and secondaries.
Connecting wire
High quality PVC 600V
Primary and HT : 24AWG UL1015
Secondary LT : 20 AWG UL1015
Weight
2.3Kg
Compliance
Built and tested to safety standard BS EN 61558-1 2005
Consisting of our excellent 3-3 output transformer and our robust mono 3-3 mains transformer.
Provides the magnetic components for a new mono Mullard 3-3 build, at a reasonable price.
A superb quality mains transformer for any valve project. Originally designed to power a Mullard 3-3 Mono amplifier.
Proudly made in the United Kingdom
Primaries
European primary voltages, 220V, 230V, 240V and 250V.
US primary voltage dual 120V.
Secondaries
HT winding 300V – 0 – 300V at 80mA DC
Heater winding 6.3V at 1A centre tapped.
Rectifier winding 6.3V at 1A
Steel
High quality Grain Orientated M6 0.35mm.
Hand laminated for the best stacking factor, and accuracy.
Winding wire
Double coated Grade 2 enamelled copper wire.
Wound using CNC winders for highly accurate wire placement and turns count.
Electrostatic Screen
Solid copper sheet providing the best RF screening possible between primary and secondaries.
Connecting wire – stand up only
High quality PVC 600V
Primary and HT : 24AWG UL1015
Secondary LT : 20 AWG UL1015
Weight
1.5Kg
Compliance
Built and tested to safety standard BS EN 61558-1 2005